You don't need to be an expert or pay a contractor to change the colour of your cabinets. Here are some recommendations for getting the appearance you want, Unfinished Wood Drawer Fronts can be painted or stained.
1. SEPARATE YOUR CABINETRY'S DRAWER AND DOOR FRONTS
The prep work you conduct on your unfinished cabinet doors and drawer fronts is the key to a good outcome. Before applying your first layer, you may need to lightly sand and prepare the surface. Unfinished cabinet doors in a paint-grade species may require a little putty and significant sanding to achieve a smooth surface.
Do these methods to restore your cabinet doors and drawer fronts:Firstly, take off the cabinet doors and drawer fronts. Put a number or a position on each one so you know where to put each cabinet door or drawer front when you're finished.With a rewdriver, remove the hinges and bolts. Remove the screws from the back of the wood panel using a screwdriver to remove the front drawer. Remove the fronts from the doors and drawers and set them on a cloth or wspaper to dry. You might also use a cover to protect your countertops.
Wear eye and hand protection and work in a well-ventilated location to protect yourself from the finish. Work in a well-ventilated place, such as a garage, so that you can get some fresh air after staining or painting. The fumes from the materials might be too much for certain people.
Before you apply your first layer, be sure you have completely prepared your surfaces. Once you apply the primer or initial coat, some of the flaws will show through. For a more uniform finish, use a wood conditioner before applying a stain.
2. SELECT A PAINT COLOR OR FINISH
Choose a color for your mdf cabinet doors and drawers,or choose a colorless polyurethane finish to bring out the natural pattern in the wood grain. Here are some options for selecting a color finish:
Leave your current wood unfinished:You may add a finish to your cabinets without painting or staining them if you prefer the natural color of the wood.
Complement your room's colors:For a clean, contemporary aesthetic, most kitchens and bathrooms are monochromatic. To give your living room a fresh look, you may use a range of colors.Consider painting the doors of your cabinets a different color from the rest of your inetry.
You have the option of using bare wood or different colors of paint: One natural wood panel stands out among the rest that appears to be the same. Check the paint's label to see if it may be used on the wood before you pick a color.
Wood mdf door and drawer fronts with a glossy surface reflect light. Depending on your own taste, you may stain unfinished drawer fronts in a variety of ways.
3. SMOOTH DOWN THE WOOD
The majority of sanding will already have been completed by most manufacturers. You may get the smooth surface you want by lightly sanding with fine-grit sandpaper (about 200-400 grit). There are a few things to keep in mind as you begin to prepare your drawer fronts and cabinet doors:Whether you're sanding vertically or horizontally, always sand with the grain.
Gently sand.The use of powered hand sanders is safe but proceed with caution. If you have any gouges or indentations in your cabinet doors or drawer fronts, now is an excellent time to fill them in.
When you're finished, say off the cabinet doors and drawer fronts to remove any remaining wood dust. To remove any dirt or debris, wipe the cabinet components with a moist cloth. Use a hand vacuum and a sander every time you sand the panels.
CABINET DOOR SUPPLY OFFERS NEW CABINET DOORS AND DOOR FRONTS.
We provide new cabinet doors, drawer fronts, and drawer boxes at Cabinet Door Supply. For your next large-scale project, you can buy as little as one cabinet door or as many as a dozen distinct cabinetry parts.To go with your mdf doors, you might get matching drawer fronts
Comments